Additional information
| Weight | 2 kg |
|---|---|
| Dimensions | 20 × 20 × 10 cm |
Intelligent Cavity Cleaning Set
USD 299.00
WM Cleaning device has 7 modes you can choose from:
1- AUTOMATIC MODE: Long press the POWER button for 3 seconds, press A, and then press the START button to clean automatically
2- AUTOMATIC CLEANING PROCESS: (1) Washing + Ultrasonic cleaning: 10 minutes, (2) Drying + Ultrasonic vibration: 20 minutes, (3) Drying + UV disinfection: 20 minutes
3- SEMI-AUTOMATIC MODE: After startup, press the M button to enter the semi-automatic mode.
4- CLEANING MODE: After entering the semi-automatic mode, press the W button, and then press START for cleaning and ultrasonic vibration. Duration: 30 minutes
5- ULTRASONIC VIBRATION MODE: After entering the semi-automatic mode, press the UW button, and then press START to begin the ultrasonic vibration cleaning. Duration: 30 minutes
6- DRYING MODE: After entering the semi-automatic mode, press the D button and then press START to dry the cavity. Duration: 60 minutes
7- ULTRAVIOLET DISINFECTION MODE: After entering the semi-automatic mode, press the UV button, and then press START to begin UV disinfection. Duration: 20 minutes
All you have to do is to insert the device’s head into your doll orifice and press the start button. The machine does the dirty work for you! Checkout the below video for more instructions on how to use it:
Checkout the below notice for technical information about the cleaning device.
Before use, prepare a bucket filled with water (more than 5.5L | 1.45 gal) and an empty bucket (capacity no less than 5.5L | 1.45 gal). Connect the power supply, inlet pipe and outlet pipe to the device.
Put the inlet pipe into the bucket filled with water, and put the outlet pipe into the empty bucket.
Insert the cleaning jet into the doll’s vagina with the drainpipe facing down and ensure that the first raised ring enters into the doll’s cavity to prevent water leakage. Apply lubricant on the cleaning jet if the doll cavity is too tight.
Press and hold the POWER button for 3 seconds to start the machine, and select the appropriate cleaning program from above. During the cleaning process, you can press the pause button to interrupt the cleaning or drying process. Press the CANCEL button to abort the process.
