Sex Doll Options & Upgrades

Recently a new option has been introduced for WM Doll, YL Doll, OR Doll, SE Doll, Dollhouse168 (2019), Doll 4Ever, and Piper Doll models. The gel filled breasts adds enhanced squeeziness and touch feel realism.

Please note that bodies with fuckable nipples such as YL Doll 160cm , YL Doll 148cm, WM Doll 155cm or WM B19 Torso are not compatible with the gel-filled breasts option either.

The gel used to fill the breasts is shown on the picture below:

For WM Doll, YL Doll, OR Doll or SE Doll models, you can now choose the H2O vagina upgrade for both the built-in (fixed) or removable vagina sleeve.

H2O vagina upgrade is a special vulcanized TPE blend that do not require lubricant at all. Simply add a few drops of water to activate lubrification. Please note that this upgrade is only available for the vagina cavity.

Regular TPE blends do require lubrication during penetration.

The breathing upgrade robotically enables your doll’s rib cage to inflate and deflate, juste like if your doll was breathing for additional realism! Rest your head on her chest and relax after a long day…Please note that this option is not compatible alongside with the heating system.

The breathing system only has 1 speed, and is a 12V powered engine with a 3,000 mah battery. You can see the outside switch (located underneath the armpit) on the picture below.

You can still bath or shower your doll with the breathing system, but make sure to cover the switch to prevent water from getting in. As always with dolls that have electronics we do not recommend showering or bathing, as humidity does never too well with electronic devices over the long run. Prefer a bucket of soapy water and a soft sponge instead.

WM Doll heating system allows you to raise your doll’s whole body temperature to the same one has the human body, for increased realism. If you prefer to only warm up cavities before use, we recommend our premium USB Warming Rod instead.

Thanks to heating wires twisted around the skeleton, your doll can reach human temperature in no-time and stay warm for hours for an  ultimate realistic experience!

---

IMPORTANT NOTICE REGARDING THE HEATING SYSTEM:

Make sure when in use, to keep legs and arms straight (not bent). Do not heat up your doll while she is sitting down for example, which could damage the heating system over time.

WM DOLL, YL DOLL, OR DOLL & SE DOLL: The body heating system is compatible with the enhanced skeleton, but cannot have shrugging shoulders. Additionally models of C cup and below can only have solid breasts with the body heating function. These restrictions only apply to these 4 brands.

The body heating system is not compatible either with the following bodies, which have a waist too thin to fit the device:

1. YL Doll 148cm 28C
2. WM Doll 155cm 26AA
3. WM Doll 155cm 24I
4. WM Doll 171cm 34G

The TPE Doll body heating system comes with a power charging cord and the adapter, based on your country voltage system.

The heating system has a safety thermostat power switch once the selected temperature has been reached. Please note that not all brands do have that safety thermostats power switch so be careful not to leave it on for excessive periods of times without supervision. We don’t recommend to exceed 50 minutes.

Certain brands such WM, YL & OR Doll allow you to change the temperature on the thermostat device.

HOW TO USE: Simply plug the power plug into the sock located on your doll, and choose the desired temperature. Wait for around 30 minutes, until your doll reaches temperature. For faster heating, wrap your doll into the sheet provided with her.

 

 

 

 

 

 

For more information on how to use WM, YL, OR & SE Doll heating system, you can also see this video.

---

IS MY DOLL STILL WATER RESISTANT? CAN I STILL SHOWER WITH MY DOLL?

Your doll will still be water resistant with the heating device, make sure however to plug back the heating socket first. You can read our tutorial on how to shower with your doll for more information.

The moaning feature is fine too as long as your isolate the neck joint (with a plastic bag between the body and the head for example) and have your doll wear a waterproof swim cap.

For the sake of both functions lifespan, humidity is usually not the best way to maintain electronics in top shape. If you select any of these 2 options, we recommend you limit as much as possible the time underwater. Ideally prefer a bucket of soapy water and a sponge.

You can also view this video with English subtitles on Youtube here.

Please note that this option is only available for WM Doll, YL Doll, OR Doll, SE Doll, 6YE and HR Doll models.

TPE Dolls oral cavities are orientated upward and not downward (as heads are detachable). TPE Dolls with the regular mouth option do not have a tongue but you can purchase our resin teeth & tongues set or a removable TPE tongue here.

Please note that these teeth sets or removable tongues are for aesthetic purpose only. The oral cavity cannot be used with the resin tongue and teeth set in place (these teeth sets are however fully compatible with either the standard or the enhanced mouth option and simply insert into the mouth cavity).

Finally note that not all dolls with visible teeth are wearing our resin teeth set on the pictures. Only a small minority does, such as Sami or Helvia. Most models with a smiling facial expression have actually TPE teeth that are part of the mould, for example Sildra, Cruela or Linza. Dolls face with visible teeth are still compatible with the resin teeth sets.

---

ENHANCED MOUTH OPTION

Regular mouths on TPE Dolls are sculpted, but do not have a fixed tongue. Only enhanced mouth cavities do.

TPE Dolls heads with the enhanced mouth option have a better carved mouth as well as a fixed tongue inside the mouth. You can stick this tongue out slightly, to take pictures for example.

Please note that the enhanced mouth option is not available alongside the implanted hair option. The reason is because TPE Doll heads with implanted hair are made of a more rigid blend in order for the hair not to fall off. These specific blend type being harder, it cannot be further sculpted once unmoulded.

Please note that this upgrade is only available for WM Doll, YL Doll, OR Doll, and SE Doll models of 140cm (4ft7) & above.

TPE & Silicone sex dolls have by default fingers that are made of copper wires. Although easily poseable, these neither allow a good grip nor a long term sustainability.

With this new approach, WM Doll has listened and delivered. You can now upgrade for articulated phalanges, which guarantee a better grip, a wider array of hand posing options,  and a longer life expectancy for the fingers.

View how hands articulate in the below video:

WARNING: As always with hands in particular, common sense is needed. Just like human bones, doll ones can break too, and hands must be ideally protected during manipulation or transportation of your doll. Refrain from putting too much weight on the wrists, especially in positions such as doggystyle. Prefer counterbalancing weight or off-loading it onto the elbows instead for example.

By extra soft TPE, understand a more jelly like touch feel with increased elasticity. Manufacturers have the ability to adjust the stiffness of the TPE. As a rule of thumb, the more elastic the TPE the higher its viscosity, but also it’s fragility.

Jelly like TPE are more prone to tearing, and might potentially require more maintenance and repairs over the long run.

For WM Doll, YL Doll, OR Doll & SE Doll these resin teeth sets are available directly in pre-built models customization options. Our resin teeth & tongues sets are compatible with all TPE or silicone sex dolls that have a mouth cavity.

Each set includes 3 different mouth gutters that you can insert into the oral cavity of your doll. A top teeth only gutter, on open mouth gutter (with both top & bottom teeth visible), and a closed mouth gutter (with both top & bottom teeth visible).

The vampire resin teeth & tongues set includes 6 magnetic split tongues. The regular resin teeth & tongues set has 8 magnetic tongues. You can clip these directly into the open mouth gutter #2 for additional facial expressions.

Please note that these teeth sets are all compatible with the enhanced mouth option, as well as doll’s head that have a fixed TPE tongue by default.

Note that these resin teeth & tongues sets are strictly for aesthetic purpose. You cannot use your doll’s mouth for oral intercourse while these are inserted into the cavity.

You can get these sets individually in our accessories bundle kits here.

Turn your doll into a sexy shemale with WM Doll TPE penis inserts! This brand has 2 available lengths to choose from: 15cm (5.9in) or 21cm (8.3in).

 

 

 

 

 

 

 

The insert has an L shape and inserts into the vaginal cavity of your doll. Penis inserts have a soft rounded silicone stick structure inside, allowing them to bend slightly into the desired angle. It is also used for male TPE dolls, and insert into a small cavity on the pelvic area as per below picture:

Lace wigs are the perfect alternative to implanted hair and have several advantages too:

• PRICE: Although more expensive than regular wigs, lace wigs are still much cheaper than implanted hair
• PRODUCTION LEAD TIME: No delay unlike with implanted hair
• RIGIDITY: The head can be made in the same blend as the body, thus keeping its elasticity, and therefore not impacting oral intercourse ability
• COMPATIBILITY: You can use lace wigs with any brand, along with either the moaning system or the enhanced mouth
• FLEXIBILITY: Get as many haircut styles as you want and change it easily in no-time for a different wig!

 

 

 

 

 

 

 

Example of a WM Doll model with a lace wig (no eyebrow patches)

You can learn how to install a lace wig onto your doll skull with this tutorial.

Certain TPE Doll brands such as WM Doll, YL Doll, OR Doll, SE Doll are able to propose implanted hair and eyebrows thanks to a special implementation technique. Note that it has several disadvantages:

• PRICE: Implanted hair cost more than a wig would
• PRODUCTION LEAD TIME: Implanted hair take around 3 weeks to produce. This is because hair must be manually added 1 by 1 into the skull.
• RIGIDITY: In order for the implanted hair not to fall, a special TPE blend is made for the head, which is much more rigid than usual. As a result oral intercourse becomes difficult
• COMPATIBILITY: Implanted hair are not compatible with the enhanced mouth option, and the moaning option speaker cannot be located behind the skull where it usually goes. It would have to be placed in the back, between the scapulas which isn’t the best option aesthetically wise.
• AVAILABILITY: Implanted eyebrows are only allowed if the implanted hair option is also selected. Additionally, only the above TPE brands have these options available
• FLEXIBILITY: Unlike with a wig, you cannot really change the style of the haircut. You can always place a wig cap onto the skull and had a wig onto it though

---

LOOK-ALIKE ALTERNATIVES

So how can you achieve the perfect look that would look just as if your doll had real hair and eyebrows? You will need 2 things: Lace wigs and eyebrow patches. Read more about this topic on this page.

You can choose to have hair added to your doll pubic area, but also on any part of the body for male TPE sex dolls. For example the forearms, the chest, the belly, the legs, as well as the face.

WM Cleaning device has 7 modes you can choose from:

1- AUTOMATIC MODE: Long press the POWER button for 3 seconds, press A, and then press the START button to clean automatically

2- AUTOMATIC CLEANING PROCESS: (1) Washing + Ultrasonic cleaning: 10 minutes, (2) Drying + Ultrasonic vibration: 20 minutes, (3) Drying + UV disinfection: 20 minutes

3- SEMI-AUTOMATIC MODE: After startup, press the M button to enter the semi-automatic mode.

4- CLEANING MODE: After entering the semi-automatic mode, press the W button, and then press START for cleaning and ultrasonic vibration. Duration: 30 minutes

5- ULTRASONIC VIBRATION MODE: After entering the semi-automatic mode, press the UW button, and then press START to begin the ultrasonic vibration cleaning. Duration: 30 minutes

6- DRYING MODE: After entering the semi-automatic mode, press the D button and then press START to dry the cavity. Duration: 60 minutes

7- ULTRAVIOLET DISINFECTION MODE: After entering the semi-automatic mode, press the UV button, and then press START to begin UV disinfection. Duration: 20 minutes

 

 

 

 

 

All you have to do is to insert the device’s head into your doll orifice and press the start button. The machine does the dirty work for you! Checkout below for more instructions on how to use it:

 

 

 

 

 

Checkout the below notice for technical information about the cleaning device. Alternatively you can purchase WM Doll intelligent cleaning set without getting a doll in our accessories section here.

Before use, prepare a bucket filled with water (more than 5.5L | 1.45 gal) and an empty bucket (capacity no less than 5.5L | 1.45 gal). Connect the power supply, inlet pipe and outlet pipe to the device.

Put the inlet pipe into the bucket filled with water, and put the outlet pipe into the empty bucket.

Insert the cleaning jet into the doll’s vagina with the drainpipe facing down and ensure that the first raised ring enters into the doll’s cavity to prevent water leakage. Apply lubricant on the cleaning jet if the doll cavity is too tight.

Press and hold the POWER button for 3 seconds to start the machine, and select the appropriate cleaning program from above. During the cleaning process, you can press the pause button to interrupt the cleaning or drying process. Press the CANCEL button to abort the process.

For WM Doll, YL Doll, OR Doll & SE Doll models, you can choose between the following realistic painting options. You can choose either of these options independently or together:

FRECKLES (HEAD & BODY)

Freckles are added during finishings using permanent non-toxic paint. Note that you can also easily reproduce the same result with makeup at home too.

Please note that the freckles and veins are hardly visible on darker skin tones such as #5 tan. It won’t be visible at all on #6 light ebony or #7 ebony skin tones, so avoid selecting it alongside any of these 3.

ENHANCED MUSCLES DEFINITION (BODY)

Using here again non-toxic permanent paint,  body curves and reliefs are darkened to create additional realistic skin shadowing. You can see this option on WM Doll 168cm Betje or Amira.

Same as for the freckles above, this will be more visible on lighter skin tones such as #1 pale, #2 light caucasian, #3 caucasian, or #4 light tan.

PERMANENT PAINTING (LABIAS & AREOLAS)

You can choose to have your doll’s labias and areolas made with makeup by default or using here again, permanent non-toxic ink. The advantage of makeup is that it is also completely safe even if ever ingested (you’ve kissed a girl before right? Girls put lipstick on…). Another advantage is that you can change the color of the labias or the areolas or their size if ever needed.

If you choose the permanent painting option note that the color takes a few week to settle and needs to fade away slightly to reach its optimal realism. We don’t recommend to have pink labias or areolas made permanent as this particular color looks rather bright, electric and not really natural until it fades away a bit.

VEINS (BODY)

You can also choose to have veins painted all along the body for additional realistic skin texturing. As for freckles or enhanced muscles definition painting, veins are more visible on lighter skin tones.

You can see below pictures of a #2 light caucasian and a #5 tan skin tone body, with all 3 body options.

Weight reduction includes a foam core in between the TPE/Silicone and the skeleton, which reduces the amount of material being used and cut the overall weight. While a weighty doll will feel more realistic, the lighter the weight the easier the manipulation and carrying, which is appealing to doll owners, especially on thicker sex dolls.

The moaning system is located behind the head and comes with a charging USB-C power cord. Sound is triggered when moving the head. Speakers can be turned ON & OFF.

Your doll will produce sexy moaning sounds (several presets) thanks to a mention based sensor located inside the speaker.

A pressure based system is can also be wirelessly connected to the speaker. Please note that these sensors are powered with lithium batteries and therefore cannot be shipped inside dolls, due to air freight restrictions.

If you wish the upgrade your moaning system to a motion and pressure based one, you will need to order these extra sensors separately and install them yourself (by opening your doll up to insert the sensors and close it back ).

Quick moving eyes have are different for silicone and TPE dolls. On Piper Doll, Dollhouse168 & Doll 4Ever models, the eyeball has an extra silicone ball enabling moving into different directions more easily than with regular eyeballs. Just like with the usual eyes, these can be removed from the eyeball cavities and changed for another color easily.

For Dollhouse 168, Doll 4Ever & Piper Doll TPE models, you can choose the have the lips made with a shiny coating, to give it a gloss like finish. Note that this layer isn’t permanent and will wear off after a few months.

You can nevertheless always bring brilliance back to your doll’s lips using a gloss or any other shiny lipstick.

For Dollhouse168, Doll 4Ever and Piper Doll models, you can choose the vagina texture that you would like for your model. You can see a each option picture below.

The below textures are available for either the built-in vagina option or for the removable sleeve. Please note that vagina textures are only available on the above brands.

Regular mouths on TPE Dolls are sculpted, but do not have a fixed tongue. Only enhanced mouth cavities do.

TPE Dolls heads with the enhanced mouth option have a better carved mouth as well as a fixed tongue inside the mouth. You can stick this tongue out slightly, to take pictures for example.

Please note that the enhanced mouth option is not available alongside silicone head with or without the implanted hair option. The reason is because silicone doll heads are too rigid to have the mouth cavity even be used for oral intercourse.

The gel filled breasts adds enhanced squeeziness and touch feel realism. This option is recommended for HR Doll & 6YE Premium, as TPE from this manufacturer is softer and more rigid than their competitors (closer to silicone touch feel).

Please note that breasts that are too small (usually as a rule of thumb, of C-Cup and below), can neither be made hollow nor gel-filled (not enough space).

The gel used to fill the breasts is shown on the picture below:

By extra soft TPE, understand a more jelly like touch feel with increased elasticity. Manufacturers have the ability to adjust the stiffness of the TPE. As a rule of thumb, the more elastic the TPE the higher its viscosity, but also it’s fragility.

Jelly like TPE are more prone to tearing, and might potentially require more maintenance and repairs over the long run.

TPE sex dolls have by default fingers that are made of copper wires. Although easily poseable, these neither allow a good grip nor a long term sustainability. 6YE and HR Doll now also proposes an articulated phalanges option as per below:

WARNING: As always with hands in particular, common sense is needed. Just like human bones, doll ones can break too, and hands must be ideally protected during manipulation or transportation of your doll. Refrain from putting too much weight on the wrists, especially in positions such as doggystyle. Prefer counterbalancing weight or off-loading it onto the elbows instead for example.

You can choose to have hair added to your doll pubic area, but also on any part of the body for male TPE sex dolls. For example the forearms, the chest, the belly, the legs, as well as the face.

The moaning system is located behind the head and comes with a charging USB-C power cord. Sound is triggered when moving the head. Speakers can be turned ON & OFF.

Your doll will produce sexy moaning sounds (several presets) thanks to a mention based sensor located inside the speaker.

A pressure based system is can also be wirelessly connected to the speaker. Please note that these sensors are powered with lithium batteries and therefore cannot be shipped inside dolls, due to air freight restrictions.

If you wish the upgrade your moaning system to a motion and pressure based one, you will need to order these extra sensors separately and install them yourself (by opening your doll up to insert the sensors and close it back ).

6YE Premium heating system allows you to raise your doll’s whole body temperature to the same one has the human body, for increased realism. If you prefer to only warm up cavities before use, we recommend our premium USB Warming Rod instead.

Thanks to heating wires twisted around the skeleton, your doll can reach human temperature in no-time and stay warm for hours for an  ultimate realistic experience!

---

IMPORTANT NOTICE REGARDING THE HEATING SYSTEM:

Make sure when in use, to keep legs and arms straight (not bent). Do not heat up your doll while she is sitting down for example, which could damage the heating system over time.

The TPE Doll body heating system comes with a power charging cord and the adapter, based on your country voltage system.

Please note that 6YE Premium heating system does not have a safety thermostats power switch so be careful not to leave it on for excessive periods of times without supervision. We don’t recommend to exceed 30 minutes.

HOW TO USE: Simply plug the power plug into the sock located on your doll, and choose the desired temperature. Wait for around 30 minutes, until your doll reaches temperature. For faster heating, wrap your doll into the sheet provided with her.

---

IS MY DOLL STILL WATER RESISTANT? CAN I STILL SHOWER WITH MY DOLL?

Your doll will still be water resistant with the heating device, make sure however to plug back the heating socket first. You can read our tutorial on how to shower with your doll for more information.

The moaning feature is fine too as long as your isolate the neck joint (with a plastic bag between the body and the head for example) and have your doll wear a waterproof swim cap.

For the sake of both functions lifespan, humidity is usually not the best way to maintain electronics in top shape. If you select any of these 2 options, we recommend you limit as much as possible the time underwater. Ideally prefer a bucket of soapy water and a sponge.

JY Doll models can come with the uterus upgrade option. This special mould includes a cervix (visible on the left side of the below picture), on top of the standard vaginal wall texture (available regardless whether you select this option or not).

 

 

 

 

The uterus upgrade is only available on models from the brand JY Doll.

JY Doll has 3 different TPE blend types, for all JY Dolls models. You can now choose between “Normal TPE”, “Jelly TPE” or “Platinum TPE” on each JY Doll single product pages:

---

1- NORMAL TPE BLEND TYPE

The normal TPE blend type is a more affordable blend, and is the most affordable of the 3 types. Normal TPE is more oily than Jelly TPE or Platinum TPE, and is more elastic than Platinum TPE.

Normal TPE blend is not to be mistaken with cheap TPE blends that are being sold on scam and copy websites. JY Doll’s entry level TPE blend is still a premium medical grade blend, compliant to high quality standards.

An oily TPE blend simply means that slightly more baby powder will be needed than with platinum TPE. Your doll’s skin should feel like a baby’s butt so if the TPE gets tacky, it’s time to powder her up!

You can choose any of JY Doll’s 5 skin tone options with the normal TPE blend.

---

2- JELLY TPE BLEND TYPE

Jelly TPE blend type is slightly more expensive than normal TPE, yet cheaper than platinum TPE. It is the most elastic TPE blend of the 3, meaning that has the most natural jiggling effect.

This is the closest to what JY Doll was doing prior to introducing these new TPE blend types.

Please note that only #1 pale skin tone and #2 light caucasian skin tones can be made in Jelly TPE blend.

---

3- PLATINUM BLEND TYPE

Platinum TPE blend type is the most expensive of the 3 types, and is also the most rigid and the less oily. Platinum is closer in touch feel to silicone, and is less jiggly.

Please note that platinum TPE must sit for a week once your doll has been unmolded, prior to shipping. Please note that only #1 pale skin tone and #2 light caucasian skin tones can be made in Platinum TPE blend.

The gel filled breasts adds enhanced squeeziness and touch feel realism. Please note that breasts that are too small (usually as a rule of thumb, of C-Cup and below), can neither be made hollow nor gel-filled (not enough space).

The gel used to fill the breasts is shown on the picture below:

For JY Doll models, you can now choose between the following realistic painting options. You can choose either of these options independently or together:

FRECKLES (HEAD & BODY)

Freckles are added during finishings using permanent non-toxic paint. Note that you can also easily reproduce the same result with makeup at home too.

Please note that the freckles and veins are hardly visible on darker skin tones such as #5 tan. It won’t be visible at all on #6 ebony skin tone.

ENHANCED MUSCLES DEFINITION (BODY)

Using here again non-toxic permanent paint,  body curves and reliefs are darkened to create additional realistic skin shading. Same as for the freckles above, this will be more visible on lighter skin tones such as #1 pale, #2 light caucasian, #3 caucasian, or #4 light tan.

PERMANENT PAINTING (LABIAS & AREOLAS)

You can choose to have your doll’s labias and areolas made with makeup by default or using here again, permanent non-toxic ink. The advantage of makeup is that it is also completely safe even if ever ingested (you’ve kissed a girl before right? Girls put lipstick on…). Another advantage is that you can change the color of the labias or the areolas or their size if ever needed.

If you choose the permanent painting option note that the color takes a few week to settle and needs to fade away slightly to reach its optimal realism. We don’t recommend to have pink labias or areolas made permanent as this particular color looks rather bright, electric and not really natural until it fades away a bit.

VEINS (BODY)

You can also choose to have veins painted all along the body for additional realistic skin texturing. As for freckles or enhanced muscles definition painting, veins are more visible on lighter skin tones.

The moaning system is located behind the head and comes with a charging USB-C power cord. Sound is triggered when moving the head. Speakers can be turned ON & OFF. You can also adjust the volume of the sounds on JY & AS Doll models.

Your doll will produce sexy moaning sounds (several presets) thanks to a mention based sensor located inside the speaker.

A pressure based system is can also be wirelessly connected to the speaker. Please note that these sensors are powered with lithium batteries and therefore cannot be shipped inside dolls, due to air freight restrictions.

If you wish the upgrade your moaning system to a motion and pressure based one, you will need to order these extra sensors separately and install them yourself (by opening your doll up to insert the sensors and close it back ).

JY Doll heating system allows you to raise your doll’s whole body temperature to the same one has the human body, for increased realism. If you prefer to only warm up cavities before use, we recommend our premium USB Warming Rod instead.

Thanks to heating wires twisted around the skeleton, your doll can reach human temperature in no-time and stay warm for hours for an  ultimate realistic experience!

---

IMPORTANT NOTICE REGARDING THE HEATING SYSTEM:

Make sure when in use, to keep legs and arms straight (not bent). Do not heat up your doll while she is sitting down for example, which could damage the heating system over time.

The TPE Doll body heating system comes with a power charging cord and the adapter, based on your country voltage system.

Please note that JY Doll heating system does not have a safety thermostats power switch so be careful not to leave it on for excessive periods of times without supervision. We don’t recommend to exceed 30 minutes.

HOW TO USE: Simply plug the power plug into the sock located on your doll, and choose the desired temperature. Wait for around 30 minutes, until your doll reaches temperature. For faster heating, wrap your doll into the sheet provided with her.

---

IS MY DOLL STILL WATER RESISTANT? CAN I STILL SHOWER WITH MY DOLL?

Your doll will still be water resistant with the heating device, make sure however to plug back the heating socket first. You can read our tutorial on how to shower with your doll for more information.

The moaning feature is fine too as long as your isolate the neck joint (with a plastic bag between the body and the head for example) and have your doll wear a waterproof swim cap.

For the sake of both functions lifespan, humidity is usually not the best way to maintain electronics in top shape. If you select any of these 2 options, we recommend you limit as much as possible the time underwater. Ideally prefer a bucket of soapy water and a sponge.

Irontech Doll proposes 2 different TPE penis inserts length & 2 different shapes:

• 15 cm (5.9 in) flaccid penis
• 15 cm (5.9 in) erect penis
• 17.5 cm (6.9 in) flaccid penis
• 17.5 cm (6.9 in) erect penis

With an L shape similar to the WM Doll penis inserts, these can be placed into your doll’s vaginal cavity to turn her into a sexy shemale! It is also used for male TPE dolls, and insert into a small cavity on the pelvic area as per below picture:

You can choose to have hair added to your doll pubic area, but also on any part of the body for male TPE sex dolls. For example the forearms, the chest, the belly, the legs, as well as the face.

TPE & Silicone sex dolls have by default fingers that are made of copper wires. Although easily poseable, these neither allow a good grip nor a long term sustainability.

With this new approach, Irontech Doll proposes also an upgrade for articulated phalanxes, which guarantees a better grip, a wider array of hand posing options,  and a longer life expectancy for the fingers.

WARNING: As always with hands in particular, common sense is needed. Just like human bones, doll ones can break too, and hands must be ideally protected during manipulation or transportation of your doll. Refrain from putting too much weight on the wrists, especially in positions such as doggystyle. Prefer counterbalancing weight or off-loading it onto the elbows instead for example.

By extra soft TPE, understand a more jelly like touch feel with increased elasticity. Manufacturers have the ability to adjust the stiffness of the TPE. As a rule of thumb, the more elastic the TPE the higher its viscosity, but also it’s fragility.

Jelly like TPE are more prone to tearing, and might potentially require more maintenance and repairs over the long run.

Irontech now proposes 5 different vagina cavity to choose from. These are available for both vagina types and for both Irontech TPE and silicone sex dolls. Each cavity texture has a different design that will provide a different experience during sexual intercourse.

Lace wigs are the perfect alternative to implanted hair and have several advantages too:

• PRICE: Although more expensive than regular wigs, lace wigs are still much cheaper than implanted hair
• PRODUCTION LEAD TIME: No delay unlike with implanted hair
• RIGIDITY: The head can be made in the same blend as the body, thus keeping its elasticity, and therefore not impacting oral intercourse ability
• COMPATIBILITY: You can use lace wigs with any brand, along with either the moaning system or the enhanced mouth
• FLEXIBILITY: Get as many haircut styles as you want and change it easily in no-time for a different wig!

 

 

 

 

 

 

 

Example of a WM Doll model with a lace wig (no eyebrow patches)

You can learn how to install a lace wig onto your doll skull with this tutorial.

Irontech Doll heating system allows you to raise your doll’s whole body temperature to the same one has the human body, for increased realism. If you prefer to only warm up cavities before use, we recommend our premium USB Warming Rod instead.

Thanks to heating wires twisted around the skeleton, your doll can reach human temperature in no-time and stay warm for hours for an  ultimate realistic experience!

---

IMPORTANT NOTICE REGARDING THE HEATING SYSTEM:

Make sure when in use, to keep legs and arms straight (not bent). Do not heat up your doll while she is sitting down for example, which could damage the heating system over time.

The TPE Doll body heating system comes with a power charging cord and the adapter, based on your country voltage system.

Please note that Irontech Doll heating system does not have a safety thermostats power switch so be careful not to leave it on for excessive periods of times without supervision. We don’t recommend to exceed 30 minutes.

HOW TO USE: Simply plug the power plug into the sock located on your doll, and choose the desired temperature. Wait for around 30 minutes, until your doll reaches temperature. For faster heating, wrap your doll into the sheet provided with her.

---

IS MY DOLL STILL WATER RESISTANT? CAN I STILL SHOWER WITH MY DOLL?

Your doll will still be water resistant with the heating device, make sure however to plug back the heating socket first. You can read our tutorial on how to shower with your doll for more information.

The moaning feature is fine too as long as your isolate the neck joint (with a plastic bag between the body and the head for example) and have your doll wear a waterproof swim cap.

For the sake of both functions lifespan, humidity is usually not the best way to maintain electronics in top shape. If you select any of these 2 options, we recommend you limit as much as possible the time underwater. Ideally prefer a bucket of soapy water and a sponge.

The moaning system is located behind the head and comes with a charging USB-C power cord. Sound is triggered when moving the head. Speakers can be turned ON & OFF.

Your doll will produce sexy moaning sounds (several presets) thanks to a mention based sensor located inside the speaker.

A pressure based system is can also be wirelessly connected to the speaker. Please note that these sensors are powered with lithium batteries and therefore cannot be shipped inside dolls, due to air freight restrictions.

If you wish the upgrade your moaning system to a motion and pressure based one, you will need to order these extra sensors separately and install them yourself (by opening your doll up to insert the sensors and close it back ).

AS Doll heating system allows you to raise your doll’s whole body temperature to the same one has the human body, for increased realism. If you prefer to only warm up cavities before use, we recommend our premium USB Warming Rod instead.

Thanks to heating wires twisted around the skeleton, your doll can reach human temperature in no-time and stay warm for hours for an  ultimate realistic experience!

---

IMPORTANT NOTICE REGARDING THE HEATING SYSTEM:

Make sure when in use, to keep legs and arms straight (not bent). Do not heat up your doll while she is sitting down for example, which could damage the heating system over time.

The TPE Doll body heating system comes with a power charging cord and the adapter, based on your country voltage system.

Please note that AS Doll heating system does not have a safety thermostats power switch so be careful not to leave it on for excessive periods of times without supervision. We don’t recommend to exceed 30 minutes.

HOW TO USE: Simply plug the power plug into the sock located on your doll, and choose the desired temperature. Wait for around 30 minutes, until your doll reaches temperature. For faster heating, wrap your doll into the sheet provided with her.

---

IS MY DOLL STILL WATER RESISTANT? CAN I STILL SHOWER WITH MY DOLL?

Your doll will still be water resistant with the heating device, make sure however to plug back the heating socket first. You can read our tutorial on how to shower with your doll for more information.

The moaning feature is fine too as long as your isolate the neck joint (with a plastic bag between the body and the head for example) and have your doll wear a waterproof swim cap.

For the sake of both functions lifespan, humidity is usually not the best way to maintain electronics in top shape. If you select any of these 2 options, we recommend you limit as much as possible the time underwater. Ideally prefer a bucket of soapy water and a sponge.

The moaning system is located behind the head and comes with a charging USB-C power cord. Sound is triggered when moving the head. Speakers can be turned ON & OFF. You can also adjust the volume of the sounds on JY & AS Doll models.

Your doll will produce sexy moaning sounds (several presets) thanks to a mention based sensor located inside the speaker.

A pressure based system is can also be wirelessly connected to the speaker. Please note that these sensors are powered with lithium batteries and therefore cannot be shipped inside dolls, due to air freight restrictions.

If you wish the upgrade your moaning system to a motion and pressure based one, you will need to order these extra sensors separately and install them yourself (by opening your doll up to insert the sensors and close it back ).

This technique basically implies to crave inside the silicone and inject gel in order to make it less rigid and more elastic. Siliko Doll proposes several areas for which you can have this upgrade.

Silicone being much more rigid than TPE, silicone doll owners usually prefer to have certain areas possibly made softer, such as the butt cheeks, breasts, or vagina for example.

Quick moving eyes on Siliko Doll and Piper Doll silicone models have an extra socket surrounding the eyeball enabling moving into different directions more easily than with regular eyeballs. Just like with the usual eyes, these can be removed from the eyeball cavities and changed for another color easily.

Implanted hair and eyebrows give an ultra realistic look and are particular great for no-bangs looks or tied back hairstyles. They do however have several disadvantages:

• PRICE: Implanted hair cost more than a wig would
• PRODUCTION LEAD TIME: Implanted hair take around 3 weeks to produce. This is because hair must be manually added 1 by 1 into the skull.
• FLEXIBILITY: Unlike with a wig, you cannot really change the style of the haircut. You can always place a wig cap onto the skull and had a wig onto it though

---

LOOK-ALIKE ALTERNATIVES

So how can you achieve the perfect look that would look just as if your doll had real hair and eyebrows? You will need 2 things: Lace wigs and eyebrow patches. Read more about this topic on this page.

Dolls that are made of silicone material usually can also have the ability to stand up without bolts underneath her feet. This is thanks to a more rigid material in comparison to TPE, which can support heavier weights without being squished in between the  metal feet sole and the floor.

This option is also available for hands on certain brands.

Starpery proposes 2 kind of silicone blend stiffness for their sex doll heads (which are only available in silicone material).

Soft silicone heads are slightly more expensive, but enable your doll’s mouth cavity to be used for oral intercourse. You cannot however choose the implanted hair or eyebrows alongside with this option.

Rigid silicone heads are free of additional charge, but cannot be used for oral intercourse due to their stiffness.

Starpery has a rather limited collection of bodies available, however they do propose to choose between either the TPE or the silicone version of it, which is rather nice. Please note that you can only choose solid breasts with Starpery silicone bodies.

Silicone bodies are more expensive by default. You can read more about the differences between TPE and silicone on this page.

As a reminder, Starpery only proposes hybrid or full silicone sex dolls (heads are only available in silicone regardless the body material that you select).

Starpery proposes either quick moving ultra realistic eyeballs (with blood vessels for additional realism), quick moving eyes, or regular eyes.

Quick moving eyes on Starpery Doll models have an extra socket surrounding the eyeball enabling moving into different directions more easily than with regular eyeballs. Just like with the usual eyes, these can be removed from the eyeball cavities and changed for another color easily.

Certain sex doll brands such as Starpery Doll are able to propose implanted hair and eyebrows thanks to a special implementation technique. This option is only available if you select the stiff silicone head blend option (not compatible with soft silicone heads).

Note that it has several disadvantages:

• PRICE: Implanted hair cost more than a wig would
• PRODUCTION LEAD TIME: Implanted hair take around 2-3 weeks to produce. This is because hair must be manually added 1 by 1 into the skull.
• RIGIDITY: Starpery has 2 kind of silicone, a softer and a more rigid blend. If you select the implanted hair and/or eyebrows option, the silicone blend of the head can only be made rigid, to prevent hair from falling. The oral cavity will not be suitable for oral intercourse anymore.
• FLEXIBILITY: Unlike with a wig, you cannot really change the style of the haircut. You can always place a wig cap onto the skull and had a wig onto it though

---

LOOK-ALIKE ALTERNATIVES

So how can you achieve the perfect look that would look just as if your doll had real hair and eyebrows? You will need 2 things: Lace wigs and eyebrow patches. Read more about this topic on this page.

Recently a new option has been introduced for Starpery models. The gel filled breasts and/or butt adds enhanced squeeziness and touch feel realism.

Please note that TPE bodies are not compatible with the gel-filled butt option. Both Starpery TPE and silicone bodies can have gel-filled breasts.

The gel used to fill the breasts or butt is shown on the picture below:

Starpery proposes enhanced hands upgrade, which replaces default copper wires with better articulated fingers, giving your doll a better grip and longer lasting fingers!

For Starpery models, you can choose between the following realistic painting options. You can choose either of these options independently or together:

FRECKLES (HEAD & BODY)

Freckles are added during finishings using permanent non-toxic paint. Note that you can also easily reproduce the same result with makeup at home too.

ENHANCED MUSCLES DEFINITION (BODY)

Using here again non-toxic permanent paint,  body curves and reliefs are darkened to create additional realistic skin shadowing. For those familiar with figurine painting such as Warhammer ones, this is similar to a lavish painting technique (the method consists in applying paint strongly diluted with water, in order to darker reliefs).

PERMANENT PAINTING (LABIAS & AREOLAS)

You can choose to have your doll’s labias and areolas made with makeup by default or using here again, permanent non-toxic ink. The advantage of makeup is that it is also completely safe even if ever ingested (you’ve kissed a girl before right? Girls put lipstick on…). Another advantage is that you can change the color of the labias or the areolas or their size if ever needed.

If you choose the permanent painting option note that the color takes a few week to settle and needs to fade away slightly to reach its optimal realism. We don’t recommend to have pink labias or areolas made permanent as this particular color looks rather bright, electric and not really natural until it fades away a bit.

VEINS (BODY)

You can also choose to have veins painted all along the body for additional realistic skin texturing. As for freckles or enhanced muscles definition painting, veins are more visible on lighter skin tones.

Weight reduction includes a foam core in between the TPE/Silicone and the skeleton, which reduces the amount of material being used and cut the overall weight. While a weighty doll will feel more realistic, the lighter the weight the easier the manipulation and carrying, which is appealing to doll owners, especially on thicker sex dolls.

The moaning system is located behind the head and comes with a charging USB-C power cord. Sound is triggered when moving the head. Speakers can be turned ON & OFF.

Your doll will produce sexy moaning sounds (several presets) thanks to a mention based sensor located inside the speaker.

A pressure based system is can also be wirelessly connected to the speaker. Please note that these sensors are powered with lithium batteries and therefore cannot be shipped inside dolls, due to air freight restrictions.

If you wish the upgrade your moaning system to a motion and pressure based one, you will need to order these extra sensors separately and install them yourself (by opening your doll up to insert the sensors and close it back ).

Zelex eyes are quick moving ultra realistic eyeballs by default (with blood vessels for additional realism).

Quick moving eyes on this brand have an extra socket surrounding the eyeball enabling moving into different directions more easily than with regular eyeballs. Just like with the usual eyes, these can be removed from the eyeball cavities and changed for another color easily.

To learn in greater details how to change your sex doll eyes color, please check this guide.

Certain sex doll brands such as Zelex Doll are able to propose implanted hair and eyebrows thanks to a special implementation technique. You can choose the hair type, whether you would like implanted hair to be straight, wavy or curly, but also the length, and or the color.

Implanted hair remain the ultimate detail to increase the realism of a silicone or TPE sex doll. Note that it has several disadvantages:

• PRICE: Implanted hair cost more than a wig would
• PRODUCTION LEAD TIME: Implanted hair take around 2-3 weeks to produce. This is because hair must be manually added 1 by 1 into the skull.
• RIGIDITY: Zelex has 2 different silicone blend you can choose from, rigid or soft. In order for the implanted hair not to fall, a harder silicone blend is made for the head, which is much more rigid than usual. As a result oral intercourse is not available with this option for silicone sex dolls.
• FLEXIBILITY: Unlike with a wig, you cannot really change the style of the haircut. You can always place a wig cap onto the skull and had a wig onto it though

---

LOOK-ALIKE ALTERNATIVES

So how can you achieve the perfect look that would look just as if your doll had real hair and eyebrows? You will need 2 things: Lace wigs and eyebrow patches. Read more about this topic on this page.

For Zelex models, you can choose between the following realistic painting options. You can choose either of these options independently or together:

FRECKLES (HEAD & BODY)

Freckles are added during finishings using permanent non-toxic paint. Note that you can also easily reproduce the same result with makeup at home too.

---

ENHANCED MUSCLES DEFINITION (BODY)

Using here again non-toxic permanent paint,  body curves and reliefs are darkened to create additional realistic skin shadowing. For those familiar with figurine painting such as Warhammer ones, this is similar to a lavish painting technique (the method consists in applying paint strongly diluted with water, in order to darker reliefs).

---

PERMANENT PAINTING (LABIAS & AREOLAS)

You can choose to have your doll’s labias and areolas made with makeup by default or using here again, permanent non-toxic ink. The advantage of makeup is that it is also completely safe even if ever ingested (you’ve kissed a girl before right? Girls put lipstick on…). Another advantage is that you can change the color of the labias or the areolas or their size if ever needed.

If you choose the permanent painting option note that the color takes a few week to settle and needs to fade away slightly to reach its optimal realism.

---

VEINS (BODY)

You can also choose to have veins painted all along the body for additional realistic skin texturing. As for freckles or enhanced muscles definition painting, veins are more visible on lighter skin tones.

---

BIKINI TAN LINES (BODY)

You can choose to have bikini tan lines on the breasts and crotch areas of your sex doll, which add up realism.

The moaning system is located behind the head and comes with a charging USB-C power cord. Sound is triggered when moving the head. Speakers can be turned ON & OFF.

Your doll will produce sexy moaning sounds (several presets) thanks to a mention based sensor located inside the speaker. A pressure based system is can also be wirelessly connected to the speaker. Please note that these sensors are powered with lithium batteries and therefore cannot be shipped inside dolls, due to air freight restrictions.

If you wish the upgrade your moaning system to a motion and pressure based one, you will need to order these extra sensors separately and install them yourself (by opening your doll up to insert the sensors and close it back ).

Zelex proposes an hymen option, your sex doll will loose her virginity for her first night with you. Note that this option is for single use only

The moaning system is located behind the head and comes with a charging USB-C power cord. Sound is triggered when moving the head. Speakers can be turned ON & OFF.

Your doll will produce sexy moaning sounds (several presets) thanks to a mention based sensor located inside the speaker. A pressure based system is can also be wirelessly connected to the speaker. Please note that these sensors are powered with lithium batteries and therefore cannot be shipped inside dolls, due to air freight restrictions.

If you wish the upgrade your moaning system to a motion and pressure based one, you will need to order these extra sensors separately and install them yourself (by opening your doll up to insert the sensors and close it back ).

Silicone sex dolls have by default fingers that are made of copper wires. Although easily poseable, these neither allow a good grip nor a long term sustainability. Zelex also proposes an articulated phalanges option as per below:

WARNING: As always with hands in particular, common sense is needed. Just like human bones, doll ones can break too, and hands must be ideally protected during manipulation or transportation of your doll. Refrain from putting too much weight on the wrists, especially in positions such as doggystyle. Prefer counterbalancing weight or off-loading it onto the elbows instead for example.

Weight reduction includes a foam core in between the TPE/Silicone and the skeleton, which reduces the amount of material being used and cut the overall weight. While a weighty doll will feel more realistic, the lighter the weight the easier the manipulation and carrying, which is appealing to doll owners, especially on thicker sex dolls.

Thermoplastic elastomers or silicone can be blended into different colors. As a result, you can choose between different skin tones for your sex doll.

---

SKIN TONES BY TPE DOLL MANUFACTURER

The available skin tones vary depending on the TPE doll manufacturer. WM Doll for example, has a total of 6 skin colors to choose from, when other manufacturers have either less or more skin tone options.

Because TPE or silicone blends vary from one fabricant to the other we do not recommend that you choose a head and a body from two different manufacturers. As a consequence you would not have a uniform tone between both parts.

---

HOW TO FIND A GIVEN MODEL SKIN TONE

The question you need to ask yourself is “what skin complexion do I like?”. Humans are complex and often want what they do not have. People with darker skin tones often prefer lighter ones and vice versa. Asian people for example, tend to culturally prefer pale and lighter skin tones, whereas Westerners will perceive skin tan as a criteria of beauty.

Keep in mind that TPE or silicone material is much like human skin, and will look lighter or darker depending on the light.

If you would like your doll to be just like a given pictures set and aren’t sure which option to select, you can simply select the “same as pictures” option.

You can choose which eye color you want for your TPE Doll. We always give a free extra pair so leave us a note at checkout about the extra eye color you would like!

---

CHANGE AS YOU LIKE

TPE Dolls eyes are very easy to replace for a different color in less than 2 minutes! You can read more about how to change a TPE doll eyes on this page, thanks to our quick tutorial.

---

AVAILABLE OPTIONS PER BRAND

You will notice that the eye color selection varies depending on the brand of the doll you are looking at. This should however not prevent you from selecting any additional colors that you would like on top of that! All eyes are intercompatible across TPE sex dolls manufacturers, and have the same diameter (14-16mm).

Check out our accessories bundle kits and create your own in no-time! You can choose any detached parts that you want across all TPE Doll brands and manufacturers. Simply visit this page.

Eyes are very easy to remove and change for another color in no-time! You can additionally orientate them into any direction. For more information on how to change your sex doll’s eyes, please see this tutorial.

Just like for the eyes, we always also give an extra free wig on top of the one that you selected for your order, which you can select in the “freebies” section, for pre-configured models, or as the last customization steps in our full doll customizer.

 

 

 

 

Wigs are also very easy to change and are fixed onto your doll’s skull (full-cap). Our TPE Dolls wigs are made of synthetic hair bases. These wigs can also be tight by hand thanks to a clipping system as shown on this page.

---

STANDARD WIG VS LACE WIG

There are 2 kinds of wigs type, standard wigs or lace wigs. Both types can either be made with synthetic or real human hair (harder maintenance with human ones).

Regular wigs are cheaper than lace wigs, but don’t always look as realistic depending on the hair styling. Yet lace wigs are a more affordable alternative to implanted hair (whenever available). Please see the “implanted hair option” toggle below for more information.

 

 

 

 

Lace wigs have an extra transparent lace layer that you cut and glue onto the forehead for the doll (with eyelash glue for example) which allows a better blending with the skin on the hairline. Lace wigs are suitable for no fringe and no bang looks, where the hairline is exposed (for example on a ponytail hairstyle).

So far you can choose a lace wig for WM Doll, YL Doll, OR Doll and Irontech Doll models as a customization option, or purchase some separately here.

---

WIG ON THE PICTURES NOT AVAILABLE IN OUR STANDARD SELECTION?

Are you looking for the same wig as the one a given model is wearing? Depending on the wig, we might be able to provide it for free to you. Certain wigs are available outside of our standard selection, for example Megan’s curly ginger wig.

If you are looking for a particular hairstyle please contact us prior to placing your order so that we can double check on your behalf.

Just like for the eyes color, the wig selection options change depending on the brand of the doll page you are on. You can also add extra wigs from different brands as well. Simply create an accessory bundle kit here!

---

TPE DOLL WIG CLEANING & MAINTENANCE

Synthetic wigs are very easy to wash. Checkout our quick and easy tutorial on how to clean your TPE Doll wig on this page.

Silicone sex dolls can have makeup made permanently, option that is not available for TPE dolls.

Dolls usually only have the following makeup: Eyelashes, eyeliner, eyeshadow & lipstick. Sometimes a tiny bit of blush on the cheeks and that’s it. Fairly simple isn’t it?

 

 

 

 

At Fine Love Dolls, you can choose the eyeshadow and lipstick color that you want for your model. This makeup can easily be removed and changed for another color of your choice using makeup remover.

 

 

 

 

For more information about how to apply makeup on sex dolls, please check our makeup tutorial. You can also build your own makeup kit, and choose among hundreds of items (nails, eyeshadows, lipsticks, makeup remover, eyelashes, blush, eyeliners, etc…) on this page.

For more information about how to apply makeup on sex dolls, check out our makeup tutorial. You can also build your own custom makeup kit and choose from hundreds of items here.

You can choose the color that you would like for both your TPE or silicone sex doll finger and toe nails. Nails are also very easy to change for another color if desired.

 

 

 

 

You can purchase an additional nail set at low cost in any convenient store or in our makeup kit customizer. You can either use nail glue or Super Glue to place your doll nails. Super Glue holds the best, just make sure not to put too much, in case you would like to change for another color later on (3 small dots are enough).

If you wish to remove the nails, pull them off one by one slowly. TPE is very extensible so do not worry about it stretching to up to 5 times its initial length…

Please note that the skeleton types depends on the brand that you choose.

AS | JY DOLL

For the above brands, you can either choose between the regular skeleton or the new one, which takes slightly longer to produce (2 more days).

The new skeleton has additional features (shrugging shoulder ability + hinged neck) which allows more movement ranges for your TPE Doll. Apart from these, both skeleton types are the same.

Please note that JY Doll and AS Doll (all models), as well as all 6YE Premium or HR Doll (models below 150cm | 4’11” only) skeletons do not have articulated hand plate palms unlike the other brands. Finger wires are directly connected to the radius bone (forearm). This is the same for both the regular and enhanced (EVO) skeleton.

WM | YL | OR | SE | IRONTECH DOLL | CLIMAX DOLL

These brands now only propose the enhanced skeleton with shrugging shoulders. Note that the enhanced skeleton comes with certain limitations on options for the following brands: WM, YL, OR, SE Doll. These limitations are as follow:

• Body heating system is compatible with the enhanced skeleton but shoulders cannot shrug with this option

OTHER BRANDS:

• 6YE Premium, which use their own proprietary skeleton & connectors. (Enhanced or regular)
• Piper Doll, Dollhouse 168 & Doll 4Ever are made by the same manufacturer and have their own proprietary skeleton & connectors as well, which has additional features. (Enhanced or regular)

Learn in details about the differences between TPE skeleton types as well as head to body connectors on this page. Learn in greater details how to manipulate and carry your sex doll with this tutorial.

All models that have of approximately “C/D Cup” breasts and above have hollow breasts by default. Dolls listed as “A Cup” or “B Cup” cannot have hollow breasts, as the boobs are too small to be hollow.

 

 

 

 

You can find the cup letter on any given model in her product title (for example “30C”) or in her dimensions size chart at the bottom of the product page (first row “Bra Size”).

It is really a case to case basis, and sometimes B cup breasts might actually be big enough to be made hollow. You can select whichever option that you want between hollow or solid, however please note that we might have to ignore your selection if the model that you choose has boobs too big to be made solid for example (or too small to be made hollow).

The reason is because the weight would fragilize the breast for solid big boobs. As a result it could potentially burst open over the long run. For smaller ones, it is because there isn’t enough space available for them to be made hollow.

---

WHAT IS THE DIFFERENCE BETWEEN HOLLOW AND REGULAR BREASTS?

As with women, smaller breasts tend to be harder and bigger breasts, softer. You can select at checkout whether you prefer solid or hollow breasts.

On models with bigger breasts, hollow breasts will have a more natural look and touch feel. The jiggling effect will visually look more realistic. Same goes when you squeeze or massage the boobs.

On sex dolls with smaller breasts, solid breasts will have a more natural touch feel. The firmness effect will feel more realistic, when you squeeze or massage the boobs.

We use makeup by default, for both the areolas and the labias of your TPE Doll. Thermoplastic Elastomers being breathable materials, makeup holds on it way better than on human skin.

 

 

 

 

Makeup prenetrates the first layer of the TPE of your doll and can stay for extended periods of times without fading away. Additional, makeup gives very realistic results while being safely edible and waterproof.

---

WHAT IF I PREFER PERMANENT COLOR INSTEAD?

You can select permanent color for your TPE Doll’s areolas and labias instead. Simply tick the checkbox at checkout while placing your order.

---

CUSTOM AREOLAS, LABIAS, SIZE & COLOR

Our standard selection lets you choose between 4 standard areolas and labias colors and 3 different areola diameters.

 

 

 

 

However always feel free to select a size and/or color outside from our standard selection range by contacting us prior to place your order!

TPE Dolls pubic hair are inserted into your doll’s skin one by one and do not hold very well during washing. In order to prevent your pubic hair from falling off, avoid rubbing this particular area.

We recommend selecting the pubic hair patch option if available with the brand that you like. If not available, you can always purchase it separately here.

You can choose between 5 different pubic hair style, from fully shaved to hairy. 4 different colors are available for pubic hair: Dark, light brown, blond & ginger.

 

 

 

 

Has your doll previously lost her pubic hair? Checkout our tutorial on how to replace them.

All TPE Doll manufacturers that we partner with have 2 different available feet options. Stand-up feet option or regular feet option. Both models have different features so make sure to choose wisely.

All feet types are articulated and can move up and down, as well as to a 45° degree angle.

---

REGULAR FEET OPTION

TPE dolls with regular feet sometimes have a different feet sole and might not be able to stand up at all without damaging the feet.

We do not recommend to have TPE Dolls with the regular feet option to stand up, especially heavier models. This is because the weight of the doll could damage the TPE under her feet over extended periods of time.

If you are going to have your doll standing up with this feet option no matter what, make sure that her shoes soles are flexible and soft enough.

---

STAND-UP FEET OPTION

The stand-up feet option is the best way to store your doll in a stand-up position thanks to 3 metal screws in each of her feet, giving her balance.

With this type of feet your doll should still be wearing shoes to avoid the skin to get dusty and stained.

Because the screws could damage the inside of her shoes, especially heavier models, we recommend hard solid shoe soles with this feet option. You can alternatively add protection sole in between to protect the inside of the shoes.

You can adjust the height of the screws with a screwdriver if necessary. Screws are visible and sticking out of each foot’s sole.

---

REGULAR FEET + SCREWS OPTION

If you are not sure which feet option to select, you can choose to have the feet made with a stand up feet sole, and the screws included separately into the package but not inserted into the feet. This way the feet won’t have holes and bolts popping out, and if you ever feel like changing for the stand up option, all you will have to do is insert each 3 screws into each foot sole metal plate.

What are the differences between both vagina types? From the outside, both look aesthetically the same.

Checkout this thread to learn in details about both different options or see below vagina type comparison summary:

---

BUILT-IN (FIXED) VAGINA TYPE

The built-in or fixed vagina option is the most realistic, as this is how a real woman would be. The cavity is sculpted based on a human vaginal cavity. The anal cavity is also moulded like a real one.

This vagina type is however harder to clean than the removable vagina kind. Additionally this vagina option is not compatible, if you are looking to turn your TPE Doll into a shemale thanks to our penis insert addon.

 

 

 

 

 

 

 

TPE Dolls with the built-in vagina option are still compatible with our garter dildo harness belt.

---

REMOVABLE VAGINA TYPE

The removable vagina option includes a vaginal sleeve insert which goes into the cavity of your doll. This option is easier to clean after use, as you can simply remove the insert sleeve to clean it up.

 

 

 

 

 

 

Furthermore, insert sleeves are easy to change if needed, you can purchase additional insert sleeves alongside your order on this page.

---

VAGINAL CAVITIES DIFFERENCES BETWEEN BRANDS

Depending on the TPE Brand the vagina cavity is different for the removable vagina option. The built-in vagina option cavity is the same sculpted kind across all brands or models.

---

WM/YL/OR/SE DOLL

WM Doll, YL Doll, OR Doll & SE Doll bodies with the removable vagina option all have a larger vaginal cavity in order to fit the insert sleeve. This cavity is not sculpted and is wide enough to fit a fist if the insert vaginal sleeve is not placed into the hole.

You can additionally use our TPE Penis insert addon with this vagina type, and turn your love doll into a ladyboy.

The anus cavity is the same sculpted one regardless whether you choose the built-in or the removable vagina option.

---

OTHER TPE DOLL BRANDS

Other TPE doll brands all have a sculpted vaginal cavity regardless if you select the built-in vagina option or the removable one. The cavity diameter slightly varies, but not as much as for the above brands.

Our penis insert addon is not compatible with other brands in theory, although our customers feedback says the opposite.

---

MOUTH CAVITIES

Mouth cavities are not sculpted by default, but you can select the enhanced mouth option. The enhanced mouth has a sculpted oral cavity + a fixed tongue inside of the mouth.

Please note however that the enhanced mouth option is only available for the following brands: WM Doll, YL Doll, OR Doll & SE Doll.

---

H2O VAGINA UPGRADE (WM, YL, OR & SE DOLLS ONLY)

Please note that fixed (built-in) vaginas with this option is only available for WM, YL, OR & SE Doll models. You can however buy a H2O sleeve for removable vaginas compatible with any other brands here.

The H2O vagina upgrade is a special vulcanized TPE blend that does not require lubricant and can be lubricated with water only.